Smart Plastic Card Signature Panel Hot-Stamping Machine YHS-1
Automatic Card Hot Stamping Machine/ Card Hologram Foil Stamping Machine/Card Signature Panel Stamping Machine YHS-1
1. Introduction of Smart Plastic Card Signature Panel Hot-Stamping Machine YHS-1
This machine is specially designed for hot stamping the anti-fake hologram or signature panel for plastic cards, and it can also stamp the words and patterns with gold or silver foil as well as scratch-off foil stamping on cards surface. It is controlled by PLC with friendly man-machine interface. It features high speed, good stamping quality and precise location.
| Power supply |
AC 220V, 50/60 Hz |
| Dimensions (LxWxH) |
1200×820×1580mm |
| Weight |
around 390 kg |
| Control mode |
PLC+ stepping system |
| Compressed air |
6 KG/cm2 30L/min |
| Speed |
3000 cards per hour |
| Material |
CR80 cards 0.50-0.85 mm thick |
| Power |
2.5KW |
| Position accuracy |
±0.2mm |
| Stamping temperature range |
120-180 centigrade degrees (normally 140-150) |
| Stamping area on card surface |
no more than 48mm in card width direction and no more than 80mm in card length direction. |
2. Features of Smart Plastic Card Signature Panel Hot-Stamping Machine YHS-1
- ) It applies high-quality servo motor as operation power to ensure good stability and quality stamping. Running speed and pressing stroke are adjustable.
- ) Stepping distance for gilding film can be adjusted.
- ) PLC control is adopted for reliable automatic running, and the machine will halt and alarm automatically in case of no card or failure occurring.
- ) High-quality imported temperature controller is used to control the hot stamping temperature for better stamping quality.
3. Technical Parameter of Smart Plastic Card Signature Panel Hot-Stamping Machine YHS-1
1). Power supply: AC 220V, 50/60 Hz
2). Dimensions (LxWxH): 1200×820×1580mm
3). Weight: around 390 kg
4). Control mode: PLC+ stepping system
5). Compressed air: 6 KG/cm2 30L/min
6). Speed: 3000 cards per hour
7). Material: CR80 cards 0.50-0.85 mm thick
8). Power: 2.5KW
9). Position accuracy: ±0.2mm
10). Stamping temperature range: 120-180 centigrade degrees (normally 140-150)
11). Stamping area on card surface: no more than 48mm in card width direction and no more than 80mm in card length direction.
4. Application of Smart Plastic Card Signature Panel Hot-Stamping Machine YHS-1
The machine doen't inculde the hot-stamping dies,the seller can make the die according to customers's drawing,then hot stamped the different size and logo according to customers' request.
Product Tags:
|
|
Smart Plastic Card Signature Panel Hot Stamping Machine PLC Controlled YHS-1 Images
|
